![]() Lighted Mirror Medicine Cabinets Market Key Points: Lighted Mirror Medicine Cabinets Market by Applications: Lighted Mirror Medicine Cabinets Market by Types: ![]() ![]() I used two wood screws for each cleat.Get a Sample Copy of the Lighted Mirror Medicine Cabinets Market Report Step 2: Wood Screwsĭrive 3″ wood screws from the cleats, into the studs behind the wall. How to Hang the DIY Medicine Cabinet Step 1: Stud Finder Let the adhesive dry based on the product directions. I applied a generous amount of construction adhesive to the mirror frame and placed the mirror over the frame. When the cabinet finish is dry, it’s time to attach the mirror. You can find the protective finish I used here.Once the stain is dry, add a protective finish. I applied one coat of stain to the entire cabinet. The Finish Step 1: Wood Fillerįill any exposed holes with wood filler and sand down the entire cabinet. Attach them to the mirror frame with 1 1/4″ brad nails and wood glue. Start by measuring and cutting the boards to size. Step 2: Adding the Side Mirror Trimĭo the same for the side pieces. The bottom of the trim pieces should be flush with the bottom of the mirror frame. Attach them the mirror frame with 1 1/4″ brad nails and wood glue. Measure and cut the top and bottom mirror trim pieces to size. Adding the Trim to the Mirror Step 1: Bottom Mirror Trim Attachment ![]() Slide the mirror over the shelf fame with the drawer slides. Step 3: Slide the Mirror Frame Over the Cabinet Make sure to dry fit them with the drawer slides on the mirror frame for a perfect fit. Attaching the Drawer Slides to the Mirror Frame Step 2: Attaching the Drawer Slides to the Front CleatsĬenter the main piece of the drawer slides on top of the front cleats and attach with the hardware provided. Dry-fit with the shelf cleats and the other part of the drawer slides for a perfect fit. They should be attached where the front cleats of the shelf are attached. Attaching the Drawer Slides Step 1:įlip the mirror frame over and attach the inside piece of the drawer slides to the back of the mirror frame. Attach the boards together with 1 1/4″ pocket hole screws and wood glue. Building the Mirror Frame Step 1: Building the Mirror FrameĬut the mirror frame pieces to size and drill 3/4″ pocket holes in the side boards. They should be attached 3/4″ from the top and bottom frame boards and flush with the front of the frame. Step 4: Attaching the Front CleatsĬut the front cleats to size and attach them to the inside of the front of the frame with 1 1/4″ brad nails and wood glue. The back of the shelf boards should be flush with the back of the frame. ![]() Attach them to the inside of the shelf frame with 1 1/4″ pocket hole screws and wood glue. Step 3: Attaching the ShelvesĬut the shelf boards to size and drill 3/4″ pocket holes at both ends. The pocket holes should face the back of the frame and be flush with the back of the frame. Attach them to the back of the frame with 1 1/4″ pocket hole screws and wood glue. Step 2: Attaching the Back CleatsĬut the back cleats to size and drill 3/4″ pocket holes at both ends. You can find our favorite Kreg Jig model hereĪttach the boards together with 1 1/4″ pocket hole screws and wood glue.Building the DIY Medicine Cabinet Frame Step 1: Kreg Jig 720ProĬut the cabinet frame boards to size, according to the cut list and use your Kreg Jig to drill 3/4″ pocket holes at both ends of the top and bottom pieces. If you do not have a table saw, you can use 1×3’s for the shelves and 1×2’s for the front cleats. I used my table saw to rip the width of the shelf boards to 1×3’s and the front cleats and mirror trim to 1×2’s. Note: I was able to build this with five 1×4’s. How to Build a DIY Medicine Cabinet with Storage Tools: Building the DIY Medicine Cabinet Frame.How to Build a DIY Medicine Cabinet with Storage. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |